ProductionBurningUserGuide
master

Contents

  • 1. Disclaimer
  • 2. Overview
  • 3. USB Burning/UART Burning
  • 4. SD Card Burning
  • 5. TFTPBurning
    • 5.1. Use TFTP to load firmware to DDR
    • 5.2. Burn firmware to Flash
  • 6. Burning with a Programmer
ProductionBurningUserGuide
  • »
  • 5. TFTPBurning
  • Back to Documentation Center

5. TFTPBurningΒΆ

  • 5.1. Use TFTP to load firmware to DDR
    • 5.1.1. Preparation Before Use
    • 5.1.2. TFTPLoad Firmware
  • 5.2. Burn firmware to Flash
    • 5.2.1. Preparation Before Burning
    • 5.2.2. BurnFirmware
Previous Next

© Copyright 2023, CVITEK.

Built with Sphinx using a theme provided by Read the Docs.

  • QR code for this page