ProductionBurningUserGuide
master

Contents

  • 1. Disclaimer
  • 2. Overview
  • 3. USB Burning/UART Burning
  • 4. SD Card Burning
    • 4.1. Overview
    • 4.2. Bare Burn Using an SD Card
  • 5. TFTPBurning
  • 6. Burning with a Programmer
ProductionBurningUserGuide
  • »
  • 4. SD Card Burning
  • Back to Documentation Center

4. SD Card BurningΒΆ

  • 4.1. Overview
    • 4.1.1. Introduction
    • 4.1.2. Preparation Before Burning
  • 4.2. Bare Burn Using an SD Card
    • 4.2.1. Preparation Before Use
    • 4.2.2. Bare BurnFlow
    • 4.2.3. Operation Procedure
    • 4.2.4. Operation Example
    • 4.2.5. Useupgrade.zip
    • 4.2.6. Precautions
    • 4.2.7. Configure the eMMC ECSD register
Previous Next

© Copyright 2023, CVITEK.

Built with Sphinx using a theme provided by Read the Docs.

  • QR code for this page